MicoAir TRS 2.4GHz RC + Telemetry 2-in-1 System — 1W TX Module & SBUS Receiver for ArduPilot / PX4 Model:TRS TX Module & Receiver RC + telemetry in a

RC + telemetry in a single 2

This is the first one which combine the STM32F405 with the high performance IMU sensor BMI088

and set the protocol to receive RC data: SERIALn_PROTOCOL=23 and change SERIAL6 _Protocol to something other than '23'

ELRS/SBUS receiver setup

and power with the onboard button and LED indicators — see the button configuration guide and 48-channel frequency table

MicoAir TRS 2.4GHz RC + Telemetry 2-in-1 System — 1W TX Module & SBUS Receiver for ArduPilot / PX4 Model:TRS TX Module & Receiver RC + telemetry in aOverview The MicoAir TRS combines your radio control link and telemetry data link in one 2. 4GHz LoRa system one TX module in your radio, one 2. 5 g receiver on the aircraft, and a single encrypted FHSS link carrying both your stick inputs (up to 150 Hz) and bidirectional MAVLink telemetry (up to 8 KB s) at the same time. A conventional long range build needs two separate radio systems: an RC link (like ELRS) plus a dedicated telemetry radio. That